Towing Guide - Flipbook - Page 23
CABLE DESIGNED FOR DIRECT ATTACHMENT
Figure 1
Figure 2
Figure 3
Figure 4
Where a designated attachment
point is provided, either pass the cable
through the attachment point and clip
it back on itself (Figure 1) or, if the clip
is designed to be used in this way and
this method is permitted by the trailer
manufacturer, attach it directly to the
designated point (Figure 2). Only attach
cables directly to the attachment point
that are designed for this purpose.
Where no designated attachment
point is provided, the cable should be
looped back around the neck of the
towball using a single loop only, as
shown in Figure 3.
In some instances, it may be
possible to attach the cable assembly
either to a permanent part of the
towbar structure, as long as this
meets the approval of the towbar
manufacturer/supplier, or to an
accessory sold for the specific purpose
of breakaway cable attachment as
shown in Figure 4.
NCC Caravan Towing Guide 23
